Nikon LS-10 Installation Guide for Windows - Manual (Page 16)

Chapter 2 Setting Up Coolsran
its base, or feet, to ensure that it won’t fall down. In this orientation, the “Nikon
Coolscan” label on the front panel will read properly.
Fipire 2.5
LS-1OE, properly oriented.
Proper Placement
The following guidelines and precautions should be adhered to when deciding on
placement of your LS-lOE:
1. Place Coolscan near the computer so that the maximum suggested SCSI cable
length (6 feet) is not exceeded.
2. Place the scanner so that it is easy to reach.
3. Coolscan should be placed on a flat, stable surface, free from vibration.
4. Keep the scanner away from damaging liquids by locating it away from sinks, cof­
fee pots, etc.
5. Protect Coolscan from dampness, high humidity, and excessive dust or smoke.
Dust and smoke in particular can cause undesirable effects on the scanner’s optical
systems, requiring extensive cleaning and maintenance to correct.
6 Avoid locations where a sudden change in temperature might cause condensation
inside the scanner.
7. Protect the front of the scanner from direct sunlight or bright lights.
Nikon Coolscan Installation Guide for Windows Page 9