Nikon os Speedlight SB-102 User Manual
Mikon
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- Mikon
- Speedlight
- NOMENCLATURE
- FOREWORD
- PREPARATION
- TIPS ON SPEEDLIGHT CARE
- BASIC OPERATIONS
- To remove
- A4 Insert the joint plate ■ into the joint collar®.
- AO Lock the joint.
- 40 Loosen the joint " lever ®.
- A A Insert the arm ® into the joint.
- 4C Position the arm.
- 4 A Lock the arm.
- 26 Set the ASA/ISO film speed.
- 27. Set the shutter ■ speed on the camera.
- [HrH**
- 28B. Non-TTL Automatic ' Operation.
- 29 Turn on the flash unit.
- Wait for the ready- light® to light.
- 04 Take the picture.
- 02 Turn off the flash unit.
- Bracket @
- Arm ®
- Joint
- Close-Up Shooting in the Non-TTL Automatic Mode
- Synchro Socket (D
- Sensor Socket @
- Sensor UnitSU-101 (Optional)
- Synchronization Speed
- Shooting Mode Selector ®
- Exposure Calculation Dial
- Non-TTL Automatic Flash Control
- Manual Flash Control
- Ready-Light
- Warning Function: Beyond Auto Shooting Range
- Test Firing
- Wide-Flash Adapter SW-102 (D
- Target-Light Function
- Replacing the Target-Light
- Multiple Flash Photography
- Daylight Fill-In Flash Photography
- TIPS ON SPEEDLIGHT PHOTOGRAPHY.
- OPTIMUM BATTERY PERFORMANCE
- ACCESSORIES
- ACCESSORIES —continued.
- SPECIFICATIONS
- Speedlight