Dell PowerEdge T605 - Manual (Page 79)

Installing System Components
79
• Diskette drive
• Tape backup unit
• Optical drives
6 Remove the two screws that secure the power supply to the system. See
Figure 3-8.
7 Press the power supply release tab, and slide the power supply out from the
back of the system. See Figure 3-8.
8 If you plan to replace a non-redundant power supply with redundant power
supplies, you will need to replace the power supply cage cover with the
power supply distribution board and its shroud.
a Remove the power supply cage cover by pulling the blue release pins
until they unlock from the power supply cage, and lift the cover out of
the chassis. See Figure 3-41.
b Install the power supply distribution board and its shroud. See
"Installing the Power Supply Distribution Board" on page 148.