Dell PowerEdge T605 - Manual (Page 116)

116
Installing System Components
Installing a RAID Battery
1 Insert the RAID battery into the battery carrier. See Figure 3-28.
2 Locate the battery bay towards the front of the chassis next to the hard
drive bay (see Figure 3-28).
3 Insert the battery carrier and RAID battery into the system’s battery carrier
slots, ensuring that the battery carrier is aligned and fully seated in the
slots.
4 Connect the battery cable to the SAS/RAID controller card. See the
documentation for your card for more information.
5 Route the battery cable through the cable guides on the side of the
processor shroud and through the battery cable slot in the chassis. See
Figure 3-28 for the slot location.