Dell PowerEdge T605 - Manual (Page 151)

Installing System Components
151
Figure 3-42. Removing and Installing the SAS/SATA Backplane
Installing the SAS/SATA Backplane
1 Position the SAS/SATA backplane so that the securing tabs on the chassis
are fully inserted into the securing slots on the backplane. See Figure 3-42.
2 Slide the backplane to the right until the release pin snaps into place.
1 backplane release pin 2 securing tabs (4)
3 securing slots (4) 4 SAS connector
5 backplane connector 6 SAS/SATA backplane
7 SAS cable connector 8 power cable
1
8
4
7
5
3
2
6