Dell PowerEdge T605 - Manual (Page 106)

106
Installing System Components
Figure 3-24. Cabling a PATA Optical Drive
• If you are installing a SCSI tape drive, connect the SCSI interface
cable in the drive kit from the SCSI controller card to the drive. See
Figure 3-18 for SCSI drive connections; see Figure 3-25 for SCSI
cabling guidelines.
1 processor shroud 2 ribbon cable guides
3 IDE power cables 4 PATA drive connectors
5 PATA optical drives 6 PATA data cable
7 IDE connector on system board 8 ribbon cable notch
1
7
3
4
6
8
2
5