Dell PowerEdge T605 - Manual (Page 49)

Using the System Setup Program
49
Enabling AMD PowerNow!™ Technology
AMD PowerNow! technology controls your system’s processor performance
automatically, dynamically adjusting the operating frequency and voltage
according to the task at hand. When a program does not require full
performance, significant amounts of power can be saved. Performance is
designed to still be responsive, with maximum processor performance being
delivered when required, and automatic power savings when possible.
NOTE:
AMD PowerNow! support is dependent on the operating system and
version used on your system. Disable AMD PowerNow! if your operating system
does not fully support this feature. See your operating system user guide for more
information.
To disable the AMD PowerNow! feature, run the System Setup program and
disable the Demand-Based Power Management option on the CPU
Information screen.
Virtualization Technology
(Enabled default)
NOTE:
Disable this feature if your system will not be
running virtualization software.
Displays when the processors support virtualization
technology. Enabled permits virtualization software to
use virtualization technology incorporated in the
processor design. This feature can only be used by
software that supports virtualization technology.
Demand-Based Power
Management
(Enabled default)
NOTE:
Check your operating system documentation to
verify if the operating system supports this feature.
Enables or disables demand-based power management.
When enabled, the CPU Performance State tables will
be reported to the operating system; when disabled, the
CPU Performance State tables will not be reported to
the operating system. If any of the processors do not
support demand-based power management, the field will
become read-only, and automatically set to Disabled.
Processor X ID Displays the family, model, and stepping of the
specified processor.
Table 2-4. CPU Information Screen (continued)
Option Description