Dell PowerEdge T605 - Manual (Page 135)

Installing System Components
135
3 Open the system. See "Opening the System" on page 68.
4 Remove the expansion card shroud. See "Removing the Expansion Card
Shroud" on page 72.
5 Remove the processor shroud. See "Removing the Processor Shroud" on
page 72.
NOTICE:
When you remove the heat sink, the possibility exists that the processor
might adhere to the heat sink and be removed from the socket. It is recommended
that you remove the heat sink while the processor is still warm.
NOTICE:
Never remove the heat sink from a processor unless you intend to remove
the processor. The heat sink is necessary to maintain proper thermal conditions.
6 Unlatch the two heat-sink release levers by pressing down on the ends of
the levers and pulling them outward, releasing them from the release lever
retainers. Swing the levers up to release the heat sink. See Figure 3-34.