Dell PowerEdge T605 - Manual (Page 137)

Installing System Components
137
Figure 3-35. Installing and Removing a Processor
11 Lift the processor out of the socket and leave the release lever up so that
the socket is ready for the new processor.
NOTICE:
Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board.
Installing a Processor
1 Unpack the new processor.
2 If you are installing a second processor for the first time, remove and
discard the protective shield on top of the ZIF socket. See Figure 3-35.
3 Align the processor with the socket keys on the ZIF socket. See
Figure 3-35.
1 notch in processor (2) 2 processor
3 ZIF socket shield 4 socket-release lever
5 ZIF socket 6 processor shield
7 socket key (2)
1
2 3
4
5 6
7