Dell PowerVault TL1000 - Manual (Page 56)

– NTP server address - Enter the IP address of the time server. IPv4 and
IPv6 addresses are supported, depending on the TCP/IP settings. Host
names can be entered instead of numerical IP addresses if Use DNS is
selected in the Network settings.
– Time zone - Enter the time zone relative to Greenwich Mean Time (GMT).
v If the time server is disabled, enter the local time and date manually.
– Date - Enter the date with the MM/DD/YYYY format.
– Time - Enter the time with the HH:MM:SS format.
v Auto Adjustment by PC - Select a time interval and click Start to
synchronize the library with the clock on your host computer at regular
intervals. The Web User Interface Java Applet must be running continuously
to use this function.
3. Click Submit to update the settings.
Configuring encryption settings
Before you can use the encryption capability of the tape drive, you must be sure
that certain software and hardware requirements are met.
a29z0199
Figure 3-18. Encryption settings
3-18 Dell PowerVault TL1000 Tape Autoloader User's Guide