Dell PowerVault TL1000 - Manual (Page 154)

Table C-2. Library sense data (continued)
Sense Key ASC ASCQ Description
Not Ready (02) 04 00 Logical unit not ready, cause not reportable
04 01 Logical unit is in process of becoming ready
04 03 Manual intervention required
3A 02 Media not present (tray open)
80 05 During reprogramming mode
Hardware Error (04) 15 01 Mechanical position error
40 nn Diagnostic failure on component nn (80h-ffh)
44 00 Internal target failure
53 00 Media load or eject failed
80 07 NVRAM failure
Illegal Request (05) 1A 00 Parameter list length error
20 00 Invalid command operation code
21 01 Invalid element address
24 00 Invalid field in CDB
25 00 Logical unit not supported
26 00 Invalid field in parameter list
30 00 Incompatible medium installed
3B 0D Media destination element full
3B 0E Media source element empty
3B 83 Source drive not unloaded
53 02 Media removal prevented
80 10 Drive failure
80 20 Exchange slot full
80 21 Cartridge wrong insertion
Unit Attention (06) 28 00 Not-ready to ready transition, media may
have changed
28 01 Import or export element accessed
29 00 Power ON occurred
2A 02 Log parameter changed
3F 01 Microcode has been changed
41 FE Drive error message detected*
Aborted Command (0B) 41 nn LDI command failure**
* This code is preserved only in the library log when “FID” or “ATTN DRV” message is received from the tape
drive. This code is not reported to the host server.
** This code is preserved only in the library log. This code is not reported to the host server.
C-2 Dell PowerVault TL1000 Tape Autoloader User's Guide