Dell PowerVault TL1000 - Manual (Page 138)

Table A-1. Library error codes (continued)
Code (H) Description Panel Indication Action Required
0080
X movement error #1.
During X movement, the target
stop position's origin sensor error
detected. Suspect the X origin
sensor or X motor.
CHK 0080
1. Check the accessor locking screw and
remove it if it is installed. See “Removing the
accessor locking screw” on page 3-7.
2. Cycle the power supply and try again.
v If the problem is corrected, run Library
Verify before normal library operations
resume.
v If the problem persists, see “Contacting
Dell technical support” on page 7-2. 0081
X movement error #2.
During X movement, a motor
sync error detected. Suspect the X
encoder sensor or X motor. CHK 0081
0082
X movement error #3.
During initialization, a motor sync
error detected. Suspect the X
encoder sensor or X motor. CHK 0082
0083
During an eject operation or move
operation (to a storage position),
the X origin sensor could not be
detected. Suspect the X origin
sensor or X motor.
CHK 0083
0084
During initialization, the X origin
position could not be detected.
Suspect the X origin sensor or X
motor.
CHK 0084
0088
X calibration error #1.
During X calibration, centering
sensor OFF condition could not be
detected. CHK 0088
0089
X calibration error #2.
During X calibration, centering
sensor ON condition could not be
detected. CHK 0089
008F
During X operation, the cartridge
magazine was removed. Suspect
the magazine set sensor.
CHK 008F
1. Confirm that the magazine is closed.
2. Cycle the power supply and try again.
v If the problem is corrected, run Library
Verify before normal library operations
resume.
v If the problem persists, see “Contacting
Dell technical support” on page 7-2.
00B0
Failed to detect media in the
accessor at completion of GET
operation. Suspect the centering
sensor, X motor, or P motor.
CHK 00B0
1. Confirm the media is compatible.
2. Cycle the power supply and try again.
v If the problem is corrected, run Library
Verify before normal library operations
resume.
v If the problem persists, see “Contacting
Dell technical support” on page 7-2.
A-6 Dell PowerVault TL1000 Tape Autoloader User's Guide