Dell PowerVault TL1000 - Manual (Page 61)

v Privacy - Privacy service encryption and decryption algorithm, DES or AES.
When an algorithm is specified, a privacy password and confirmation of the
password are required.
7. Select the event level to report in the Trap event field.
8. Click Test to send a test trap notification to the enabled IP addresses.
9. Click Submit to enable the settings.
Managing user access
Note: This procedure is optional.
To add users able to access the library with the Web User Interface:
1.
Expand Configure Library, if necessary, and click User Access in the left
navigation pane of the Web User Interface.
2. Select the Add action in the menu.
v Add - To add new users.
v Modify - To change the selected user's access role or password.
v Remove - To delete the selected user from the system.
3. Enter the user name and password information in the dialog box.
a29z0122
Figure 3-24. User access settings
a29z0139
Figure 3-25. Add User dialog
Chapter 3. Installation and configuration 3-23