Dell PowerVault TL1000 - Manual (Page 28)

A storage element address is assigned to each cartridge at the time the cartridge is
inserted. Storage element addresses range from 4097 to 4105 (0x1001 to 0x1009)
when the I/O station is not enabled, and from 4097 to 4104 (0x1001 to 0x1008)
when the I/O station is enabled.
Library specifications
Table 1-5. Physical specifications
Parameter Measurement
Front panel width (chassis/bezel) 445 mm (17.52 in.)/483 mm (19.02 in.)
Depth 850 mm (33.46 in.)
Height 44 mm (1.73 in.)
Weight (library only) 13 kg (28.66 lbs)
Table 1-6. Electrical specifications
Parameter Measurement
Voltage 100 - 240 Vac. (4.0 to 1.5 A)
Frequency 50 - 60 Hz
Power consumption 110 W
For more information about installation specifications, see Chapter 3, “Installation
and configuration,” on page 3-1.
Table 1-7. Environmental specifications
Parameter Operating (see Note) Storage Shipping
Temperature
10 - 38 °C (50 - 100
°F)
1 - 60 °C (34 - 140 °F)
-40 to 60 °C (-40 to
140 °F)
Temperature
variation 10 °C/hour
(maximum) 10 °C/hour
(maximum) 10 °C/hour
(maximum)
Relative humidity 20 - 80% 10 - 90% 10 - 90%
Wet bulb temperature
26 °C (78.8 °F)
maximum
29 °C (84 °F)
maximum
29 °C (84 °F)
maximum
Front Rear
Reserved slot
Column 4
Tier 2
Column 3
Tier 2
Column 2
Tier 2
Column 1
Tier 2
Column 5
Tier 1
Column 4
Tier 1
Column 3
Tier 1
Column 2
Tier 1
Column 1
Tier 1
Drive
Accessor
Column 5
Tier 2
Figure 1-7. Location coordinates
1-10 Dell PowerVault TL1000 Tape Autoloader User's Guide