Jeppesen JeppView 3 - Manual (Page 27)

JeppView User's Guide
30
NavSuite Global Free Hard Drive Space
NavSuite Global consists of JeppView, JeppView FliteDeck, and JetPlanner.
Requirement Minimum* Recommended
USA - 48 States 580 MB 1.7 GB
Europe 550 MB 1.7 GB
Worldwide 875 MB 2.75 GB
NOTE The figures above are estimates, as the data varies across update cycles.
* Minimum Requirements are for no installation of the optional data from the
Program and Electronic Chart Data CDs. They also do not take into account
RoutePack saves, Internet updates and weather file storage.
NavSuite IFR Free Hard Drive Space
NavSuite IFR consists of JeppView, JeppView FliteDeck, and FliteStar IFR.
Requirement Minimum* Recommended
USA - 48 States 610 MB 1.8 GB
Europe 580 MB 1.8 GB
Worldwide 910 MB 2.7 GB
NOTE The figures above are estimates, as the data varies across update cycles.
* Minimum Requirements are obtained by not installing any optional data available
on the Program and Electronic Chart Data CDs. Terminal Charts run from the CD. It
also does not take into account of RoutePack saves and Internet updates.
What You Get
When you first purchase JeppView or JeppView FliteDeck, you get three CDs, which
must be installed in the following order:
• Program CD — Contains program and basic geographic and terrain data.
Install this once on each computer.
• Electronic Chart Data (ECD) Disc 1 — Contains Jeppesen terminal chart
data and is updated every 14 days. Install it after the Program CD installation
and update the data through the Internet.