Jeppesen JeppView 3 - Manual (Page 246)

249
Quick Reference Guide
Keyboard Commands in the RoutePack List
Keyboard commands are shortcuts that enable you to quickly access features using
your keyboard. Each keyboard command can be duplicated by a touch-screen or
mouse command. The keyboard commands listed here apply only to the RoutePack
List. For the commands to work, something must be selected in the RoutePack List
To do this: Use these keys:
Scroll through the RoutePack List
PAGE UP, PAGE DOWN, UP arrow, DOWN
arrow, HOME and END keys
Expand the list under an item RIGHT arrow key
Collapse the list under an item LEFT arrow key
Go to the beginning or end of the
RoutePack List
CTRL+HOME or CTRL+END
Multiple Select (See Note below)
Select a range of routes, airports or
terminal charts - multiple select Click to select an item, hold down the
SHIFT key and click another item in the
list. All items in between are selected.
Select non-consecutive routes, airports
or terminal charts Click to select an item, hold down the
CTRL key and click the remaining items.
Select All RoutePacks, routes, airports
and charts in the list.
Select any item and press CTRL+A.
Copy and paste routes, airports, and
terminal charts to other locations within
the RoutePack List
Select items and press CTRL+C to copy
and CTRL+V to paste.
NOTE
Multiple select only works for like items within the same component. For
example, you can select multiple airports within a RoutePack, but not
terminal charts, routes, or airports within other RoutePacks.
Keyboard Commands in the Airport List
Keyboard commands are shortcuts that enable you to quickly access JeppView
features using your keyboard. Each keyboard command can be duplicated by a
touch-screen or mouse command. The keyboard commands listed here apply only to
the Airport List. For the commands to work as described, something in Airport List
must be selected.
To do this: Use these keys: