Jeppesen JeppView 3 - Manual (Page 162)

Working with Terminal Charts
165
5. Click OK. Unless additional airport filters are in place, all of the airports are
still displayed in the Airport List. Those containing VFR Area Charts have a
plus sign (+) next to them.
6. To minimize the Airport List to display only the airports that have a VFR Area
Chart, click Filter > Airport Filter Settings.
7. In the Airports tab, select the Have visible terminal charts check box and
click OK.
Only those airports containing VFR Area Charts appear in the Airport List.
Displaying a Terminal Chart
The Terminal Charts View enables you to view terminal charts selected from the
Airport List. You can open the Terminal Charts view by clicking the Terminal Charts
tab or double-clicking a terminal chart in the Airport List.
TIP
If you need assistance reading IFR terminal charts, refer to the textual
information in the Jeppesen Airway Manual. If you need assistance
reading VFR Terminal charts, refer to the textual information in the VFR
Airfield Manual. Both manuals are available in the Text View .
To view a terminal chart, do one of the following:
• While in the Terminal Charts View, click the terminal chart in the Airport List
or RoutePack List.
• While not in the Terminal Charts View, double-click the terminal chart in the
Airport List or RoutePack List.
The main view window displays the Terminal Charts view with the selected chart.