Jeppesen JeppView 3 - Manual (Page 193)

JeppView User's Guide
196
Reversing a Route
JeppView enables you to quickly reverse an existing route in the Routepack. When
you plan a return trip, you can easily copy an existing trip, paste it into the
RoutePack, and then reverse it.
To reverse a route, do either of the following:
• Right-click the route to be reversed in the RoutePack List and choose
Reverse Route.
• Select the route to be reversed in the RoutePack List and click Tools >
Reverse Route [RoutePack: route].
The route appears in the RoutePack List as Reversed.
To add a reversed route while keeping your original:
1. Copy a route from the RoutePack List.
2. Paste the route back into the RoutePack.
You now have two identical copies of the route.
3. Reverse the second copy of the route.
Adding an Alternate Route
You can create alternate routes from any route waypoint to an alternate airport or
other user-defined waypoint. (See
Working with User-defined Waypoints for more
about user-defined waypoints.)
The system stores an alternate route in the RoutePack at the same level as terminal
charts under the destination airport.
To add an alternate while creating a route using the Route Wizard, see Creating a
RoutePack . To add an alternate to an existing route, use either of the following:
• RoutePack List right-click option.