Jeppesen JeppView 3 - Manual (Page 142)

Working with the Airport List
145
To reactivate the filters, click Filter and select Enable Airport Filter once
more.
• Click Filter in the Airport List window and select Airport Filter Settings. In
the Filter Settings dialog box, do either of the following:
o
Click Reset this page to remove the airport filters for the respective tab
only, and then click OK.
o
Click Reset all pages to remove all airport filters, and then click OK.
Whenever you change the filter settings, Jeppesen recommends that you verify the
filter status.
Airport List Filters
Two types of filters can be used together to display a selected subset of airports and
terminal charts in the Airport List.
• Terminal Chart Filters - Determine which terminal charts display in the Airport
List based on the selected criteria. At the bottom of the Airport List, click
Filter to display a series of terminal chart filtering criteria used to filter
terminal charts. The only types of terminal charts listed In the Airport List are
those that are selected.
• Airports Filter Settings and Geographic Filter Settings - Determine which
airports to display in the Airport List.
Airport List Right-Click Menus