Jeppesen JeppView 3 - Manual (Page 118)

Using the Enroute Chart
121
1. Activate the Set Waypoint function by doing either of the following:
• Click Tools > Drop User-Defined Waypoint.
• Press CTRL+M.
The mouse pointer changes to a waypoint symbol.
2. Click in the enroute chart view to open the waypoint Properties dialog.
3. In the waypoint Properties dialog box, set the following characteristics:
• Latitude and Longitude — Modify the latitude and longitude
coordinates to change the location of the waypoint or locate it more
precisely.
• Name — Type the name of the waypoint as you want it to appear in
the Enroute Charts View.
• Altitude — Enter an altitude in feet for this location.
• Locked — Click the Locked check box to keep the waypoint from
being accidentally moved to a new location.
• Comments (optional) — Add comments for the waypoint.
• Icon — Select an icon from the list to display this waypoint in the
Enroute Charts View.
4. Click OK.
Modifying a User-Defined Waypoint
Any characteristic for a user-defined waypoint on an enroute chart can be changed.
A locked waypoint cannot by moved until it is unlocked.
To modify user-defined waypoint properties: