Jeppesen JeppView 3 - Manual (Page 242)

Tools
245
• Lat/Lon Grid — Displays latitude and longitude lines on the printed enroute
charts.
• Use Black Headers in Printout — Prints the headers on each printed page
with white text on a black background.
NOTE
When this option is cleared, the headers print as black text on a white
background. This is useful to save toner and keep thin papers from crinkling.
• Use "Compatible Mode" Printing — This is a backup option if JeppView
printing does not work properly with your printer. Every printer is different,
and often printer drivers do not support every Windows option. If JeppView
print functions are suspended or terminated, the system selects this option
automatically.
• Use dash line to divide a page — Refers to the dash line representing the
page center when printing two terminal charts per sheet. Some printer drivers
move the line off-center, making it more harder to judge the correct center
line for cutting or folding.
• Show Index page in RoutePack Printouts — Prints an index page when
printing a RoutePack.
• Allow large charts to be divided into smaller sizes — When selected, this
option prints large European VFR Area charts over many pages. In order for
JeppView to print large VFR area charts appropriately, the Two per page
check box must not be selected in the Printing RoutePack Route dialog
box. If the Allow large charts to be divided into smaller sizes option is
not selected, the large charts are scaled into a single page.
Measurements Tab