Bio-Rad Image Lab™ Software - Manual (Page 12)

| Safety and Regulatory Compliance
12 | Gel Doc XR+ and ChemiDoc XRS+ Systems with Image Lab Software
Warranty
The Gel Doc XR+ or ChemiDoc XRS+ imaging system is warranted against defects
in materials and workmanship for one year. If any defect occurs in the instrument
during this warranty period, Bio-Rad Laboratories, Inc. will repair or replace the
defective parts at its discretion without charge. The following defects, however, are
specifically excluded:
 Defects caused by improper operation
 Repair or modification done by anyone other than Bio-Rad Laboratories,
Inc. or the company’s authorized agent
 Use of spare parts supplied by anyone other than Bio-Rad Laboratories,
Inc.
 Damage caused by accident or misuse
 Damage caused by disaster
 Corrosion caused by improper solvents or samples
General Precautions
 Read the user guide carefully.
 The instrument must be used only for the intended purpose of gel
documentation in research laboratories.
 The instrument must be connected to a grounded power source line and
protected by a circuit breaker.
 Do not pour liquids directly on or inside the instrument.
 Switch off all lights on the instrument immediately after use.
 Clean the transilluminator sample area after use.