Unitec Wash Select II POS Owner’s Manual - Manual (Page 94)

W A S H S E L E C T I I
Document Number: WS21002 80
Document Title: WSII Operations Manual
39. If your modem has trouble connecting, you may have to setup an alternate
modem connection. If so, go to Section 2.13.10.
40. When prompted, enter the password that you have configured into the Wash
Select II or the default password, 62099.

Note:
By using the default password, you will not be able to use Fleet Account Management
functions, where you can create, edit and delete fleet accounts in the system. In order
to use Fleet Account Management functions, you must set your own password as
described in 2.13.1.2 above.
41. If the password is accepted, you will be shown any current Alarms or Warnings.
42. The site number will be displayed at the top of the main menu.
43. You may select any of the functions by entering the function number and pressing
Enter:
E X A M P L E :
** Watches and Warnings **
NONE
SITE : 1
REMOTE WASH SELECT II MAIN MENU
PRESS NUMBER + ENTER KEY TO ACTIVATE FUNCTION
1 = NON-RESETTABLE ACCOUNTING REPORT
2 = REMOTE LEVEL ACCOUNTING REPORT
333 = CLEAR REMOTE LEVEL ACCOUNTING REPORT
4 = CONFIG REPORT
5 = FLEET REPORT DETAILED
6 = FLEET REPORT CONDENSED
7 = FLEET REPORT FOR ONE ACCOUNT
8 = FLEET TRANSACTION HISTORY - ALL ACCOUNTS
9 = FLEET TRANSACTION HISTORY - ONE ACCOUNT
10= FLEET ACCOUNT MANAGEMENT
11= PAGER CONFIG REPORT
12= DETAILED CREDIT TRANSACTION HISTORY
13= DETAILED CREDIT TRANSACTION HISTORY BY DATE
14= CONDENSED CREDIT TRANSACTION HISTORY
15= PASS CODE LIST
16= FLEET PROFILES
17= ALERT STATUS
18= PAGER ALARM LOG
19= DAILY REPORTS MENU
999 = HANG UP
ENTER YOUR CHOICE:
If the Enhanced Remote Reporting option has been purchased, the selection of number 15
above will give the following new menu.
SITE: 1
REMOTE WASH SELECT II DAILY REPORTS MENU