Unitec Wash Select II POS Owner’s Manual - Manual (Page 28)

W A S H S E L E C T I I
Document Number: WS21002 14
Document Title: WSII Operations Manual
Table 3. Creating/Editing a Profile
1 = STD (Standard) 2 = Coupon 3 = DEBIT
1. Press the (1) key for STD,
and then press the (*) key to
enter.
2. Press the (1) key for code or
the (3) key for card.
3. Enter the account number
and then press the (*) key to
enter. (The account number
must be at least four digits
long and must end with 0.
You may enter a card
number by swiping the card.)
4. Enter the “Wash Number”.
(This indicates which wash
will be available for this
account.) Press the (*) key to
enter.
5. “Enter Sale Price Per Wash.”
Enter the amount you have
sold the wash for and then
press the (*) key to enter.
6. Next you will be presented
with 2 options, 1 = “Print
Receipt”, and 3 = “Do not
print.” Decide if you want to
offer the customer a receipt
and enter the proper number.
7. “Enter Max Uses” (number of
washes that may be
purchased) and the press the
(*) key to enter.
1. Press the (2) key for
COUPON, and then press
the (*) key to enter.
2. Press the (1) key for code or
the (3) key for card.
3. Enter the account number
and then press the (*) key to
enter. (The account number
must be at least 4 digits long
and end with 0. You may
enter a card number by
swiping the card.)
4. “Enter the Coupon Value”
(This is the amount of the
discount allowed.) Press the
(*) key to enter.
5. “Enter Minimum Wash
Number.” (This is the least
expensive wash that may be
purchased using this account
number.) Press the (*) key to
enter.
6. You will now be presented
with 2 option, 1 = Log uses
and 3 = Do not log uses.
Enter your desired choice.
7. “Enter Max Uses?” Enter the
number of times the account
can be used and then press
the (*) key to enter.
1. Press the (3) key for
DEBIT, and then press
the (*) key to enter.
2. Press the (1) key for
code or the (3) key for
card.
3. Enter the account
number and then press
the (*) key to enter.
(The account number
must be at least 4 digits
long and end with 0.
You may enter a card
number by swiping the
card.)
4. “Enter Max Value.”
(This is the pre-paid
dollar amount for this
account.) Press the (*)
key to enter.
5. Next you will be
presented with 2
options, 1 = “Print
Receipt”, and 3 = “Do
not print.” Decide if you
want to offer the
customer a receipt and
enter the proper
number.
2.2.12 Create Fleet Accounts From Profiles
1. Using the toggle switch at the top of the CPU board, place the Wash Select II in
setup mode by moving the switch toward the back of the Wash Select II case.
(The CPU board is located on the inside right wall of the Wash Select II case.)
2. Using the (3) key to scroll forward and the (1) key to scroll back, scroll through the
main menu until the "Fleets & Coupons" option is displayed. Press the (*) key to
enter.
3. Use the (3) key to scroll until the "Add Per Profile" option is displayed. Press the
(*) key to enter.
4. Enter the profile number to base the account on, and then press the (*) key to
enter.
5. Enter the account number, and then press the (*) key to enter.