Unitec Wash Select II POS Owner’s Manual - Manual (Page 34)

W A S H S E L E C T I I
Document Number: WS21002 20
Document Title: WSII Operations Manual
**CREDIT TRANS HISTORY**
Current Date: 10/20/2000
Current Time: 10:05AM
Transactions in history:2
---------------------------
TYPE & ACCOUNT# AMOUNT DATE
AMEX 9012 $5.00 1020
VISA 0736 $6.00 1019
CAPTURED CREDIT SALES:
AX-AMEX 1 $5.00
VI-VISA 1 $6.00
MC-MASTERCARD 0 $0.00
DS-DISCOVER 0 $0.00
VC-SHEETZ Z 0 $0.00
DC-DINERS/CART 0 $0.00
JC-JCB 0 $0.00
DB-DEBIT 0 $0.00
VF-VISA FLEET 0 $0.00
MF-MC FLEET 0 $0.00
WF-WRIGHT EXP 0 $0.00
PL-SHEETZ ADV 0 $0.00
YF-VOYAGER 0 $0.00
FF-FLEET ONE 0 $0.00
FC-FLEETCOR 0 $0.00
OTHER 0 $0.00

Note:
The credit cards types in the Captured Credit Sale section shown in the samples are for
Credit Mode 5. In other Credit Modes, only Amex, Visa, MC, Discover and Other are
shown.
2.3.6 Clearing the Transaction History
This function will clear all information in the “Credit Transaction History”. If you periodically
print a “Credit Transaction” report for record keeping, you may want to clear the information
after you receive a successful print out.
Follow the steps below to clear your “Credit Transaction History”:
1. Using the toggle switch at the top of the CPU board, place the Wash Select II in
setup mode by moving the switch toward the back of the Wash Select II case.
(The CPU board is located on the inside right wall of the Wash Select II case.)
2. Using the (3) key to scroll forward and the (1) key to scroll back, scroll through the
main menu until the "Credit System" option is displayed. Press the (*) key to
enter.
3. Use the (3) key to scroll until the "Clear Trans Hist" option is displayed. Press the
(*) key to enter.
4.
You will be asked “Clear Credit History?” Press the (1) key for YES or the (3) key
for NO, at this point the display will read “History Cleared”.