Unitec Wash Select II POS Owner’s Manual - Manual (Page 77)

W A S H S E L E C T I I
Document Number: WS21002 63
Document Title: WSII Operations Manual
Error
Code #
(Numeric)
Text Name
(Text/TAP)
Detailed Description Problem
Type
Priority
(Voice/
Tone)
Lower
Tolerance
Upper
Tolerance
14 CARD READER
ERR Multiple “Bad Card reads”
(doesn’t include bad card
orientations) have been
registered. Card reader
may be faulty or dirty Warning 1 25 25
15 PAGER TEST Use this to do a Pager Test Warning 1 1 99
16 WASH FAULT Wash Fault Input has been
activated Fault 3 1 2
17 POWER ON This message is never
paged, but it will appear on
the pager log when it is
printed.
18 WASH IN
SERVICE This page is received when
the wash goes back in
service after being out of
service.
21 LOGIN FAILED Network Login Failed 1 10 10
22 LOGIN SUCCESS Network Login Success 0 1 1
2.10.3 Programming/Editing Pager Numbers
The Wash Select II can be programmed to accommodate specific pager requirements. The
following sections provide the settings and descriptions available for programming and editing
the wash Select II Pager Number.