Figure 37. door switch, Table 38. wiring guide, Door switch – Unitec Wash Select II POS Owner’s Manual User Manual
Page 210: Wiring information, Table 38. wiring guide from to
W A S H S E L E C T I I
Document Number:
WS21002
196
Document Title:
WSII Operations Manual
3. Door Switch
The door switch detects whether the door is open or closed. When the alarm is armed,
opening the door will set off the siren.
The door switch is connected to J18, pins 3 & 4 of the CPU Board.
Figure 38. Door Switch
4. Wiring Information
Refer to the following table and diagram for wiring the siren to the WS2 CPU board.
Table 38. Wiring Guide
From
To
Siren, Black Wire
CPU Board J1, Pin 4
Siren, Red Wire
CPU Board J19, Pin 4
CPU Board J1, Pin 3
CPU Board J19, Pin 3
Door Switch COM (White Wire)
CPU Board J18, Pin 6
Door Switch NO (Orange Wire)
CPU Board J11, Pin 2
CPU Board J18, Pin 5 (Blue Wire)
CPU Board J11, Pin1
Shock Sensor (either wire)
CPU Board J12, Pin 3
Shock Sensor (either wire)
CPU Board J12, Pin 6