Unitec Wash Select II POS Owner’s Manual - Manual (Page 27)

W A S H S E L E C T I I
Document Number: WS21002 13
Document Title: WSII Operations Manual
2. Using the (3) key to scroll forward and the (1) key to scroll back, scroll through the
main menu until the "Fleets & Coupons" option is displayed. Press the (*) key to
enter.
3. Use the (3) key to scroll until the "Delete All Empty" option is displayed. Press the
(*) key to enter.
4.
You will now be prompted “Delete All Empty Are You Sure?” If you are positive
you would like to delete all of your empty accounts, press the (1) key.
2.2.11 Create/Edit a Profile
This feature allows you to create up to ten different account profiles. A profile contains
account information that can be used repeatedly to create several different accounts quickly
using the same information.
1. Using the toggle switch at the top of the CPU board, place the Wash Select II in
setup mode by moving the switch toward the back of the Wash Select II case.
(The CPU board is located on the inside right wall of the Wash Select II case.)
2. Using the (3) key to scroll forward and the (1) key to scroll back, scroll through the
main menu until the "Fleets & Coupons" option is displayed. Press the (*) key to
enter.
3. Use the (3) key to scroll until the "Edit Profile" option is displayed. Press the (*)
key to enter.
4. Enter the profile number (1-10), and then press the (*) key to enter.
5. Decide which type of account you will be creating. (You can find definitions of
account types in Section 2.2.1 of this manual. Use the following table to help you
create the appropriate account type.