Unitec Wash Select II POS Owner’s Manual - Manual (Page 89)

W A S H S E L E C T I I
Document Number: WS21002 75
Document Title: WSII Operations Manual
2. Using the (3) key to scroll forward and the (1) key to scroll back, scroll through the
main menu until the “Misc. Setup” option is displayed. Press the (*) key to enter.
3.
Scroll through this menu until the “Site ID” option is displayed, and then press the
(*) key to enter.
4. Enter the site number, and then press the (*) key to enter.
2.12.5 Enable Receipt Printer
If you have purchased the optional “Thermal Receipt Printer“, it must be enabled for it to
work. The steps below will walk you through this process.
1. Using the toggle switch at the top of the CPU board, place the Wash Select II in
setup mode by moving the switch toward the back of the Wash Select II case.
(The CPU board is located on the inside right wall of the Wash Select II case.)
2. Using the (3) key to scroll forward and the (1) key to scroll back, scroll through the
main menu until the “Misc. Setup” option is displayed. Press the (*) key to enter.
3.
Scroll through this menu until the “Receipt Printer” option is displayed, and then
press the (*) key to enter.
4.
Press the (1) button for “YES” or the (2) button for “NO” or the (3) button for
“AUTODETECT”.
Default: Auto
2.12.6 Cash Receipt
If your unit is equipped with the optional “Thermal Receipt Printer”, this feature will print a
receipt for customers using cash, tokens, VIP wash pass coupons and the “External Fleet”
option. It will also print receipts for customers purchasing upgrades with cash or forms of
cash. Follow the steps below to enable cash receipts.
1. Using the toggle switch at the top of the CPU board, place the Wash Select II in
setup mode by moving the switch toward the back of the Wash Select II case.
(The CPU board is located on the inside right wall of the Wash Select II case.)
2. Using the (3) key to scroll forward and the (1) key to scroll back, scroll through the
main menu until the “Misc. Setup” option is displayed. Press the (*) key to enter.
3.
Scroll through this menu until the “Cash Receipt” option is displayed, and then
press the (*) key to enter.
4.
Press the (1) key for “YES” (enabled) or (3) for “NO” (disabled).
Default: Disabled
2.13 Remote Reporting Menu
R E Q U I R E M E N T S :

100 MHz or faster PC compatible computer with Windows 95, 98, or 2000

Terminal program (HyperTerminal is included with Windows 95, 98 and 2000)

2400 baud or faster high-speed modem for your PC