Unitec Wash Select II POS Owner’s Manual - Manual (Page 75)

W A S H S E L E C T I I
Document Number: WS21002 61
Document Title: WSII Operations Manual
will again be sent. After the second page, no more pages will be sent until the error has been
corrected. (See Table 7 for further information).
2.10.1 Pager Types
The three different pager types supported by the Wash Select II are described in the Table
below.
Table 6. Pager Message Types
Pager Type Used for Description
Numeric Numeric Pagers
Cell phones w/ numeric paging
capabilities
A simple 10-digit code is sent to describe the
site and problem #.
First 5 digits are the site number.
Second 5 digits are the problem #.
Example:
0000100008
00001 is site #1
00008 denotes Paper is out on the thermal
receipt printer
Voice/Tone Voice phones
Cell phones
Answering machines
Wash Select II will dial a phone then send a
series of tones to describe the site number and
severity of the problem. 1 beep is low priority,
3 beeps means the wash is down.
Example:
Beep…..….Beep, Beep, Beep
First beep denotes site #1
Next 3 beeps denote that the carwash is out of
service.
This message is repeated 3 times with a 4
second pause between messages.
Text (TAP) Alphanumeric Pagers (text pagers).
Nextel Phones
PCS phones w/ text messaging
(AT&T, SprintPCS).
Note: some phone & paging services
charge extra for this service.
Plain English Text Messages are sent to your
pager or cell phone. Example:
Carwash:00001
Coin Hopper Jam/Empty
This feature uses the TAP protocol to connect
to a modem server with your pager service
provider. Compatible service provider list in
Paging Access Numbers of this manual, or
contact your pager service provider to ask if
they support the TAP protocol.