Unitec Wash Select II POS Owner’s Manual - Manual (Page 124)

W A S H S E L E C T I I
Document Number: WS21002 110
Document Title: WSII Operations Manual
Table 19. Mars Bill Validator DIP Switches
Switch ON OFF Default
1 & 2
(switches work
in combination)
1 & 2 both ON =
4-way bill acceptance
1 ON, 2 OFF =
1-way bill acceptance
1 OFF, 2 ON =
2-way bill acceptance
1 OFF, 2 ON =
2-way bill acceptance
3 High Acceptance High Security OFF
4 Reject $2
(Should ALWAYS be
ON)
Accept $2
(Should NEVER be
OFF)
OFF
5 Reject $20* Accept $20 ON
6 Always Enable Harness Enable ON
7 4 Pulse per Dollar 1 Pulse per Dollar OFF
8 Vending Interfaces Gaming Interfaces OFF
3.3.2 Coinco Bill Validator
Many Wash Select IIs purchased before are equipped with the CoinCo model MAGBAB bill
validation unit
3 . 3 . 2 . 1 E m p t y i n g t h e B i l l S t a c k e r
The bill stacker holds up to 1,000 bills and it is designed to allow quick and easy removal of
stored money. To empty the bill stacker, open the top of the stacker by grasping it at the back
and lifting upward. The stacker may also be removed by pulling the plastic tab on the top
toward you, and then sliding the bill stacker upward.