Sindoh N700 User Manual
Page 93
2-
17
Copy Features
2
3. Ratio : Decide the position and size of the paper to be output.
- Standard point:
Standard point of Reduce/Enlarge differs from the scanning method of original.
When the original is set on the Flatbed , the standard point is [Set Standard]
in the corner. When the original is set on the ARDF, the standard point is the left top edge
of the original.
- There are Auto Reduce/Enlarge (R/E) for auto zoom in/out in accordance with the paper size
and Fixed Reduce/Enlarge (R/E) for zoom in/out in accordance with the user’s set
reproduction ratio.
- In the Fixed Reduce/Enlarge (R/E) copying, you can select previously set reproduction ratio or
set the desired reproduction ratio (zoom).