Sindoh N700 User Manual
Page 69

1-
39
Preparation for Using the Machine
1
Important
- Set the printing side of postcard/envelope down on the Bypass Tray:
-
In envelope printing, set it vertically and also set the printing side without pasting up
(Hold the envelope as shown in the previous page.).
- Some types of envelope may be wrongly loaded onto the Tray or crumpled.
In such case, pull the green lever in the fuse unit down.
- The print quality of envelope depends on the quality of the envelop paper.
Use clean envelope without crease, twist, or flaw.
- Set it on the Tray under 5 sheets.
1
Lift the knob up and open the Duplex Unit or Right Cover:
2
Pull the gray lever (①)in the left Fuse Unit:
Important
- After copying onto Envelope, return the lever to where it was.
Copying onto general paper without returning the lever back may cause deterioration of
picture.