Sindoh N700 User Manual
Page 238
Setting
6-
32
Feature
Description
Set point
3-Speaker Mode
Allways ON
*
On till Connect
Off
4-Tx/Rx Alarm
Transmission/Reseption alarm
setting
ON
*
OFF
5-Fax Vol.
Fax Sound Volume setting
Set up 0~7
1-Dial
prefix
Dial Prefix setting
Dial Direct Line No. size,
Select Dial Direct Line No. setting
ON
*
OFF
(Prefixed number is
not added to the
Dial No.)
Number Size
It can be set up in On in Dial Direct
Line No.
Set up 0~9 (2)
Prefix
Number
It can be set up in On in Dial Direct
Line No.
Input by the number key
(none)
2-Auto
Redial
If Fax transmission has not
completed successfully since Redial
setting Other Party’s Fax is under
communicating or due to other
problems,retry can be made by the
user’s setup number of the Dialing
No. Number of Retry; available for
setting up the retry interval.
*
ON
OFF
Number of
Retry
Number of redial of Auto Redial can
be specified.
1~5 times (2 times)
Retry interval
Interval of redial of Auto Redial can
be specified.
1~5 minutes (2 minutes)
3-Enable ECM
If specified
ON
, part of the file not
transmitted due to line error can
be transmitted again automatically
(However, Other Party’s Fax
machine shall support this feature.).
*
ON
OFF
4-TTI
Transmission data, such as current
time, can be input in the outputs.
*
ON
OFF