Sindoh N700 - Manual (Page 317)

9-
33
Maintenance and Troubleshooting
9
Trouble Cause Solution Solution
Paper is printed in
black in whole. The Machine may be in
trouble. Ask our Customer
Support Center -
Nothing is printed. Check that the front
and back of the
original is set inside
out. Set the original
correctly. P. 1-25
Several papers are fed
at the same time. Before loading papers,
arrange the papers not
to stick to each other. -
There is no toner in the
toner unit. Replace it with the new
toner unit P. 9-3
Replace the
Toner Unit
The Machine may be in
trouble. Ask our Customer
Support Center. -
Paper is output in
wrinkled condition or
the letters are printed
vague. The paper in improper
type is being used. Use the paper in
proper type. P. 1-29
Paper is wet. Replace it with the new
paper. P. 1-32
The printing condition
is dirty in whole. Check if the
background of the
original is dark.
Check if the density in
copying is set up dark. When copying the
original with dark
background, select
Auto in Copy Settings. P. 2-20