Sindoh N700 User Manual
Page 330
Appendix
10-
10
Type of
Paper
Tray
Type of
Paper
to set
Size of Paper to set
Quantity of
Paper to set
Bypass
Tray
(MFP)
Plain paper,
Thick paper
A3
, B4
, A4
, B5
,
A5
, B6
, A6
100 sheets
(A3 50
sheets)
11
”×17”
,
LG(8½
”×14”)
,
LT(11
”×8½”)
,
HLT(5½
”×8½”) ,
Executive(10½
”×7¼”) ,
F/GL(8
”×13”)
,
Foolscap(8½
”×13”)
,
Folio(8¼
”×13”)
,
Eng Quatro(8
”×10”)
,
G/LG(8¼
”Ч14”)
,
11
”Ч14” ,
G LT(10½
”Ч8”)
,
11
”Ч15” ,
US B4(10
”×14”)
,
US B4(10
”×15”)
,
Postcard (100×148mm), (148×200mm),
(267×390mm), (267×195mm),
Com 10(4¼
”×9½”),
Monarch(3⅞
”×7½”),
C5 Env.(229×162mm),
C6 Env.(114×162mm),
DL Env.(110×220mm),
(Width:90 ~ 305mm, Length:148 ~ 600mm)
(For Duplex, applied to the length up to 432mm)
- The paper that is not detected automatically needs the selection or input of the paper size. See
- When using Bypass Tray, using the paper with the length over 433mm may cause crease,
no paper feeding, or paper jam. Please set the paper correctly.
- Tracing paper(2nd original drawing paper), OHP film, postcard, or label paper should be set
one by one as possible.
- Do not exceed the upper limit mark downward from the Multi Paper Tray.
- When using Bypass Tray, Paper over A4
can be set under 50 sheets and the paper
under, A4
can be set under 100 sheets.
- When using Bypass Tray, Thick A4
paper can be set under 25 sheets and thick paper
less than A4
can be set under 50 sheets.