Sindoh N700 - Manual (Page 39)

1-
9
Preparation for Using the Machine
1
3. Operation Panel
Titles and Functions of the Components in the Control Panel are described as follows:
7 5 8 9 10 6
1
11
2
12 3
4
No. Name Description
1 【 】 Key Is used when moving to the main screen after entering each mode.
2 【RESET】 Key Is used for resetting the setup to basic set point.
3 【USB】 Key Is used for searching USB file system after attaching the USB
memory.
4 【LOGOUT】
Key
Is used for logout.
5 LCD Screen Displays the messages and screens for settings.
6 【Figure】 Key Is used for entering the number of copying quantity or Fax No., etc.
7 【 】 Key Is used for deleting the entering message by letter after letter.
8 【 】 Key Is used for canceling job of copying or scanning.
9 【 】 Key Is used for starting the work under progression.
10 【 】 Key Is used for switching to Energy Save. During, Energy Save, 【 】 is
lit by white and all lamps in the LCD screen and Control Panel are
OFF. Pressing 【 】 key during Energy Save allows the Energy Save
to release.
11 【 】
Reset button
Is used for restarting the Machine or when the Machine running
stopped.
12 USB Is used for attaching the USB memory.