Metrohm NIRS XDS Process Analyzer – DirectLight/NonContact - Manual (Page 55)

▪▪▪▪▪▪▪ 53
11. Select Options as shown at right.
Reference Standardization and Use
Instrument Calibration are essential for
method transfer between similar
instruments. Check both boxes, then click
on “OK”.
This screen is discussed in more detail in
section 10.1 of this manual.
12. Click on Acquire, Connect.
13. A Data Collection Method (DCM) selection
box will appear. It is empty, so no
selection is available.
Click on the "Ngw" button. A blank DCM
screen will be displayed.
An example of a DCM for this instrument
is s!lO'wn on the next p age.