Metrohm NIRS XDS Process Analyzer – DirectLight/NonContact - Manual (Page 31)

▪▪▪▪▪▪▪ 29
The heat sink and fans are located
on the right side of the instrument.
Heat Sinks
Fan Hausing
This shows the Basic Unit with Vortec Cooler on the
right side.
The left side of the basic XDS Process Analytics Instrument shows the AC cable entrance and RJ-45
connection, indicated by arrows.
The XDS Process Analytics Instrument is shipped with an AC cable for testing and lab use only, since
many instruments are operated in a laboratory setting prior to implementation on the process line.
This AC cable must be removed when the XDS Process Analytics Instrument is installed into the
process location. Wiring must follow all local codes and requirements, and most be run through
conduit.