Metrohm NIRS XDS Process Analyzer – DirectLight/NonContact - Manual (Page 27)

▪▪▪▪▪▪▪ 25
Data Interval:
0.5 nm Data Interval
Clock/ Oscillator Frequencies:
• 10 MHz – Amplifier
• 18.423 MHz, 25 MHz and 30 MHz – Mother Board
• 20 MHz – Module Control Board
Power Supply Voltages:
• 15VDC, 250W Maximum
• 12 VDC, 40W Maximum
Resistive Heater in Basic System and Vortec Cooled Systems:
Two (2) 150W, 240VAC resistive heaters, operated at half power.
Air Conditioner Type:
TECA 500 BTU, Solid State with Resistive Heaters.
Lamp Source in XDS Process Analytics Instrument:
42 Watt Tungsten Halogen Reflector Lamp
This lamp is specially processed to enhance NIR energy output and assure stable illumination. A spare
lamp is provided in the Accessory Kit. Do not substitute any lamp other than that available from
Metrohm or its authorized distributor. Metrohm is not responsible for damage, lost production time,
or warranty claims arising from unauthorized use of a non-Metrohm lamp.
This instrument is to be used only for the purposes described in this manual. Use for any
other purpose may void the safety features built into the XDS Process Analytics Instrument.
Metrohm Analytical is not responsible for damage or injury resulting from any use other
than those specifically described in this manual.