Metrohm NIRS XDS Process Analyzer – DirectLight/NonContact - Manual (Page 127)

▪▪▪▪▪▪▪ 125
2. Using a large, flat-bladed screwdriver, open
the door latches. Turn counter- clockwise
to open. When open, the slot is vertically-
oriented.
A coin may be used if a large screwdriver is
not available.
3. The AC (Mains) Fuses are located in the AC
Power Block. Poles 1 and 2 contain the
fuses for each side of the line.
4. Gently lift the tab to open each fuse
position. Spare fuses are included in the
instrument Accessory Kit.
Fuse Ratings:
• 250 VAC, 5 x 20mm, Slo-Blo
(2) Required
• Non-Air Conditioned: 3.15
• A Air-Conditioned:
Order spare fuses immediately, to have on
hand.