Metrohm NIRS XDS Process Analyzer – DirectLight/NonContact - Manual (Page 106)

104 ▪▪▪▪▪▪▪
From the Diagnostics menu, select Create Window
Correction.
NOTE: Window Correction must be enabled under
Configure, Options. When enabled, a new DCM
must be created for Window Correction to take
effect.
Vision requests a standard file. Select the file
“TSSZERO.da” as shown, from the C:\Vision
directory.
This file corrects the fiber optic path for the effects
of the barrels (windows) being installed.
The TSSZERO file is shown as a spectral plot. The spectrum is a flat line at 0 AU.