Rockwell Automation 20D PowerFlex 700S with Phase I Control Reference Manual - Manual (Page 79)

Rockwell Automation Publication PFLEX-RM002D-EN-E - August 2013 79
Detail Drive Configuration and Operation Chapter 1
The [Start Owner] indicates that there is not any maintained Start commands
causing the drive to run.
The operator then checks the Stop Owner. Notice that bit 0 is a value of “1,”
indicating that the Stop device wired to the Digital Input terminal block is open,
issuing a Stop command to the drive.
Until this device is closed, a permanent Start Inhibit condition exists and the
drive will not restart.
Permanent Magnet Motors The following table contains a list of specifications for the permanent magnet
motors compatible with PowerFlex 700S drives. Note that you must have a high
resolution Stegmann or compatible resolver.
Table 5 - Motor Name Plate and Rating Specifications
Driv
eL
og
ix
Not U
sed
Ad
ap
te
r 5
Not U
sed
Ad
ap
te
r 3
Ad
ap
te
r 2
Ad
ap
te
r 1
Te
rm
in
al
B
lo
ck
-
Dig
ital
In
put
Stop Owner Bit 7 6 5 4 3 2 1 0
Adapter # 0 0 0 0 0 0 1 0
Model No.
Par. No. 1
[Motor NP Volts] Par. No. 2
[Motor NP FLA] Par. No. 3
[Motor NP Frequency] Par. No. 4
[Motor NP RPM] Par. No. 5
[Motor NP Power] Par. No. 7
[Motor Poles] Current
peak
(A rms) System
Cont. Stall
Torque
(N-m) Motor
Max RPM
(line to line
V rms) (A rms) (Hz) (oper. rpm) (KW)
MPL-A310P 230 3.4 294.0 4410 0.73 8 9.9 1.58 5000
MPL-A310F 230 2.1 185.3 2780 0.46 8 6.6 1.58 3000
MPL-A320P 230 6.4 271.3 4070 1.30 8 20.9 3.05 5000
MPL-A320H 230 4.6 208.7 3130 1.00 8 13.6 3.05 3500
MPL-A330P 230 8.5 280.7 4210 1.80 8 26.9 4.08 5000
MPL-A420P 230 9.0 268.7 4030 2.00 8 32.5 4.74 5000
MPL-A430P 230 11.9 234.0 3510 2.20 8 47.4 5.99 5000
MPL-A430H 230 8.6 184.7 2770 1.80 8 31.8 6.21 3500
MPL-A4520P 230 12.4 234.0 3510 2.20 8 35.4 5.99 5000
MPL-A4520K 230 10.6 223.3 3350 2.10 8 30.4 5.99 4000
MPL-A4530F 230 9.5 144.7 2170 1.90 8 29.7 8.36 2800
MPL-A4530K 230 14.4 196.0 2940 2.50 8 43.8 8.13 4000
MPL-A4540C 230 6.6 93.3 1400 1.50 8 20.5 10.20 1500
MPL-A4540F 230 13.0 162.0 2430 2.60 8 38.2 10.20 3000
MPL-A520K 230 16.3 208.0 3120 3.50 8 46.0 10.70 4000
MPL-A540K 230 29.3 180.7 2710 5.50 8 84.9 19.40 4000
MPL-A560F 230 29.3 125.3 1880 5.50 8 84.9 27.90 3000
MPL-B310P 460 1.7 290.0 4350 0.72 8 3.0 1.58 5000
MPL-B320P 460 3.2 281.3 4220 1.30 8 5.0 2.94 5000
MPL-B330P 460 4.3 258.7 3880 1.70 8 7.0 4.18 5000