Rockwell Automation 20D PowerFlex 700S with Phase I Control Reference Manual - Manual (Page 183)

Rockwell Automation Publication PFLEX-RM002D-EN-E - August 2013 183
Appendix
A
History of Changes
This appendix summarizes the revisions to this manual. Reference this appendix
if you need information to determine what changes have been made across
multiple revisions. This may be especially useful if you are deciding to upgrade
your hardware or firmware based on information added with previous revisions
of this manual.
PFLEX-RM002C-EN-E
Topic
Updated specifications and dimensions
“Alarms” section updated
Added “Copy Cat” section
“Digital Inputs” section updated
“Direction Control and Bipolar Reference” section updated
Added “Drive Overload Temperature (Frame 9 Only)” section
Updated the Efficiency” section
Updated the “Faults” section
New “Flying Start” section
Updated drive ratings tables in the “Fuses and Circuit Brakers” section
Updated the “HIM Operations” section
Added compatible PMM tables to the “Permanent Magnet Motors” section
Updated the “Position Loop - Follower (Electronic Gearing)” section
Added the “Position Loop - In Position Detect” section
Updated the “Position Loop - Point to Point” section
Added the “Position Loop - Registration” section
Updated the “Power Loss/Ride Through” section
Added the “Reflected Wave” section
Updated the “Speed/Position Feedback” section
Updated the “Speed PI Regulator” section
Updated the “Speed/Torque Selection” section
Updated the “User Functions” section