Cleaning the display window – Rockwell Automation 2707-M232P3_M485P3 DTAM Micro Operator Interface Module User Manual

Page 87

Text mode
Original mode

Chapter 8
Troubleshooting and Maintenance

8–13

To clean the display window:

ATTENTION: Use of abrasive cleansers or solvents may
damage the window. Do not scrub or use brushes. Some types of
paper towels may scratch the window, only use a soft sponge or
cloth.

1. Disconnect power from the terminal at the power source.

2. Using a clean sponge or a soft cloth, clean the display with a mild soap

or detergent.

3. Dry the display with a chamois or moist cellulose sponge to avoid

water spots.

Removing Paint and Grease

Remove fresh paint splashes and grease before drying by rubbing lightly
with isopropyl alcohol. Afterward, provide a final wash using a mild soap or
detergent solution. Rinse with clean water.

Cleaning the
Display Window