Rockwell Automation 2707-M232P3_M485P3 DTAM Micro Operator Interface Module - Manual (Page 109)

Special Controller Functions
Appendix C
DTAM Micro
C–13
5. Press [NEXT] to display the binary value of bits 0
!15.
File=A012 Elem=002
0011100101010001
Data Format
Data
6. To change a value, move the cursor into the data field using the [PREV]
and [NEXT] keys. Enter the new data. If you are editing binary data, use
the [+/-] key to toggle the data between 1 and 0.
7. Press [ ] to to load the new data into the file element.
8. To exit, press the [MODE] key to return to the initial P-A/D screen.
You can press the [MODE] key at any time during the P-A/D function.
9. Pressing the [MENU] key at the P-A/D screen exits the P-A/D function
and displays the Main Menu.