Rockwell Automation 2707-M232P3_M485P3 DTAM Micro Operator Interface Module - Manual (Page 23)

Chapter 2
DTAM Micro Overview
2–13
The table below lists the options available for the DTAM Micro.
Table 2.A
DTAM Micro Base Items
Item Catalog No. Description
DTAM Micro 2707-M485P3 DTAM Micro with RS-485 Communications Port
DTAM Micro 2707-M232P3 DTAM Micro with RS-232 Communications Port
Programming
Software
2707-NP
(Series H or later)
Use to create application screens for the DTAM Micro on
a personal computer. Software allows completed applica-
tions to be transferred between the DTAM Micro and a per-
sonal computer.
The following accessories are available for the DTAM Micro.
Table 2.B
Accessories
Item Catalog No. Description
DH-485 Network
Interface Cable
2707-NC1
RS-485 communication cable connects DTAM Micro to an
SLC network. Cable has 9-pin male connector for the
communication port on the DTAM Micro and an 8-pin RJ
connector for the communication port on the SLC or Link
Coupler (Catalog No. 1747-AIC).
RS-232
Upload/Download
Cable
2707-NC2
RS-232 cable connects DTAM Micro (RS-232 version)
and a personal computer. Use to upload or download
applications with a personal computer running DPS
software (Catalog No. 2707-NP, Series H or later).
RS-232
Communications Cable
2707-NC3
RS-232 cable connects DTAM Micro to Channel 0 Port of
a PLC-5.
RS-232
Communications Cable
1747-CP3➀
RS-232 cable connects DTAM Micro to Channel 0 Port
(configured for RS-232) of an SLC 5/03, 5/04, 5/05.
RS-422
Communications Cable
2707-NC4
RS-422 cable connects DTAM Micro to Channel 0 Port
(configured for RS-422) of a PLC-5.
RS-485
Upload/Download
Cable
2707-NC5
For use with RS-485 version of the DTAM Micro.
Transfers files between RS-485 port of the DTAM Micro
and the personal computer’s RS-232 port. Cable
converts RS-232 signals to RS-422 signals for the DTAM
Micro. Cable has a 25-pin male connector for the
computer port and a 9 pin male connector for the port on
the DTAM Micro.
RS-232
Communications Cable
2707-NC10 RS-232 cable connects DTAM Micro to a MicroLogix 1000
120V AC to DC Adapter 1747-NP1
Provides 18 to 30 VDC output for the DTAM Micro.
Operates on 120 VAC input line voltage.
240V AC to DC Adapter 1747-NP2
Provides 18 to 30 VDC output for the DTAM Micro.
Operates on 240 VAC input line voltage.
➀ A 9-pin male to female gender adapter is required.
Product Options
Product Accessories