Using the clear fault function – Rockwell Automation 2707-M232P3_M485P3 DTAM Micro Operator Interface Module User Manual

Page 116

Special Controller Functions

Appendix C

DTAM Micro

C–20

Use the Clear Fault function to clear all major and minor faults in the logic
controller.

To clear controller faults:

1. If you are clearing a PLC-5, the controller must be in Program or Remote

Program mode.

2. Select item 4 from the Special Menu to access the Clear Fault function.

You are prompted to clear faults:

1 = Clear Faults
0 =Abort

3. Press [1] to clear the faults or [0] to abort the function.

The faults are cleared and you are returned to the special functions menu:

1 P-A/D

3 Mem Xfer

2 Mode

4 Clr Fault

Using the Clear
Fault Function