Rockwell Automation 2707-M232P3_M485P3 DTAM Micro Operator Interface Module User Manual
Dtam micro operator interface module
Table of contents
Document Outline
- 2707-UM002C-EN-P, DTAM Micro Operator Interface Module User Manual
- Important User Information
- Table of Contents
- 1 - Using this Manual
- 2 - DTAM Micro Overview
- 3 - Initial Setup and Mode Menu
- 4 - Transferring Applications
- 5 - Running Applications
- 6 - Installation
- 7 - Communication Connections and Setup
- Objectives
- Wiring Guidelines
- Connecting RS-232 Devices
- Connecting RS-485 Devices
- Communicating with a Logic Controller
- RS-232 Communciations with a PLC-5
- RS-232 Communications with an SLC
- RS-485 Communications with an SLC or DH-485 Network
- RS-232 Communications with a MicroLogix 1000
- DH485 Communications with a MicroLogix 1000
- RS-485 Communications with a MicroLogix 1000
- 8 - Troubleshooting and Maintenance
- A - Specifications
- B - DTAM Micro Cable Diagrams
- C - DTAM Micro Special Controller Functions
- Objectives
- Accessing Special Functions
- Using the P-A/D Function
- Reading the Controller Input and Output Files
- Reading/Writing the Controller Status Files
- Reading/Writing Controller Bit and Integer Files
- Reading/Writing Controller Timer Files
- Reading/Writing Controller Counter Files
- Reading/Writing Controller Control Files
- Reading/Writing Controller ASCII Files
- Reading/Writing Controller BCD Files
- Reading/Writing Controller Message Files
- Reading/Writing Controller ASCII String Files
- Using the Mode Function
- Using the Memory Transfer Function
- Using the Clear Fault Function
- Index
- Cutout Template
- Back Cover