Rockwell Automation 2707-M232P3_M485P3 DTAM Micro Operator Interface Module - Manual (Page 112)

Special Controller Functions
Appendix C
DTAM Micro
C–16
7. Press [NEXT] to display the value in a binary format:
F=MG011 Elem=003.01
0011111000111110
8. To change a value, move the cursor into the data field using the [PREV]
and [NEXT] keys. Enter the new data. If you are editing binary data, use
the [+/-] key to toggle the data between 1 and 0.
9. Press [ ] to to load the new data into the file element.
10. To exit, press the [MODE] key to return to the initial P-A/D screen.
You can press the [MODE] key at any time during the P-A/D function.
11. Pressing the [MENU] key at the P-A/D screen exits the P-A/D function
and displays the Main Menu.